1, how to quickly adapt to master the feel of spray paint
When it comes to adapting to the feel of spray paint, first of all, when we get a can of spray paint, we should first weigh the weight of the can of spray paint, the basic capacity of a brand of spray paint is almost the same, but different brands will have differences.(If you are going to finish a work, it is best to use the same brand of self-paint, so that there are no color differences, incompatibilities, etc.)
We need to find an open space to practice with old walls or iron plates.
Place your index finger on the spray head and slowly increase the pressure until you can spray the paint. Press several times, then remember the pressure to start the paint. When you hit the bottom of the spray, how much paint will be sprayed and how much area will be sprayed.Then move slowly, both far and near, and this will help you learn the thickness of the lines later on.Once you are familiar with the amount of force required to paint yourself, it is never too late to start painting again.
2. How to use self-spray paint
1. Shake the bottle repeatedly for about 30 seconds before formal spraying, so as to stir the contents inside and make the paint mix fully.
2, in the process of painting to maintain a distance of 20-30 cm or so, too close to produce bubbles and accumulation, too far away from the area is too large, resulting in a waste of the amount of spray paint.
3. In the process of spraying, the method of sweeping and spraying should be adopted at one go, that is, moving around and up and down. By all means, the method of brushing and spraying should not only be repeated in one position, which will cause hanging and affect the whole effect.Also can not be sprayed very thick, in the use of spray paint attention to each time a thin layer, each time after spraying the table dry and then spray the next layer, repeated several times.May be in the spray of the first layer when you will feel which position is not covered evenly, in fact, this is a normal phenomenon, such as the first layer of dry and then several colors, you can be completely covered, do not worry about Oh.
4. If the dark substrate is to be changed to light color, it is necessary to use white spray paint for backing first, and then spray a layer of color after the white paint is dried, so that the coloring effect is better and the material is more economical.
5, in the process of spraying, we should pay attention to the use of wallpaper knife, transparent tape, paper.(these small tools can help you determine the good area scope, you need, after all, due to the paint spray problems will make the edge of the painting is not smooth, it will be difficult to live up to the standards of accurate range we want, so using cellophane tape can give you an unexpected effect, wallpaper knife can be very useful, can help us to quick points good boundaries.)
6. If there is paint in the spray can after use, it can be kept for the next time to continue to use. The preservation method is also very simple.
