How to use the tire weld?
Automatic tire fluid will have a greater market in the future, after all, it is very good to use for emergency, but how to use automatic tire fluid?You should know that in the process of driving, if the tire is punctured and deflated, it is very troublesome, you may need to replace the spare tire, or go to the repair shop to repair, but the automatic tire filling fluid can allow you to complete the tire repair in a short time and can also inflate.
First, the principle of automatic filling tire fluid
Automatic Tire Repair Fluid is a white foam liquid, a kind of polymer compound, which is compressed in large quantities in the bottle and can be injected into the tire through the valve nozzle to replenish the air.When the tire repair fluid is injected into the car, the centrifugal force of the tire can be used to cover the inside of the tire, forming a layer of sealing film, play the role of tire repair.It can be found that this is very important, so how to use automatic tire fluid?So let's see.
Two, the use of automatic tire repair fluid
1. Shake the tire repair liquid evenly first and shake it quickly for about one minute.
2, and then lift the outer pipe, pipe mouth and tire valve docking, and then tighten.
3. Tear off the fixing ring on the top of the bottle and open the switch (generally clockwise unscrew the valve), and the tire filling liquid will start to work.
4. White liquid can be seen pouring into the tire from the catheter. The whole process is very fast.
Three, automatic filling tire fluid matters needing attention
It should be noted that the automatic tire repair fluid can only repair small wounds with a diameter of less than 6mm. When the automatic tire repair fluid is injected, it will take 10 kilometers to complete the repair.And it also has a protective effect on the big wound, but the big wound should not pull out the puncture, and should be immediately driven to the repair shop for repair.